08/22/18 19:18 PM  

RingCentral Room Connector - Joining to a RingCentral Meeting | Pairing

« Go Back

Article

 
SummaryThis article provides information on how to start a RingCentral Meeting and pair it with the RingCentral Room Connector system. Follow the instructions below.

The Pairing feature allows the Host to join a RingCentral Room Connector system into a RingCentral Meeting without entering the Meeting ID from the device. This may be helpful when it is difficult or impossible to type in the Meeting ID on your RingCentral Room Connector device.
Details

 

RingCentral Room Connector - Joining to a RingCentral Meeting | Pairing


QUICK TIP: To join the RingCentral Room Connector to a RingCentral Meeting by dialing in to the RingCentral Room Connector system, click this link


There are two (2) options on how the Host can pair RingCentral Meetings with the RingCentral Room Connector system:
i.  Pair a Scheduled RingCentral Meeting
ii. Pair an Unscheduled RingCentral Meeting


Pair a Scheduled RingCentral Meeting

2. Click on Meetings.

rc meetings 5.1 meetings
 
3. Select the scheduled meeting you wish to start and click Pair.

rc meetings 5.1 meetings pair
 
4. The Meeting ID will be pre-populated. Enter the Pairing Code, and then click Connect

NOTE: The pairing code will appear on the Room Connectors Splash Screen

enter pair code

Your RingCentral Room Connector system will then automatically join the meeting.



Pair an Unscheduled RingCentral Meeting

2. Click Start without video or Start with video.

rc meetings 5.1 start video
 
3. Click Invite > Invite a Room System > Dial In and in the Or Enter the pairing code below field, enter the pairing code and then, click Invite.

NOTE: The pairing code will appear on the Room Connectors Splash Screen.

rc meetings 5.1 pair

Your RingCentral Room Connector system will then automatically join the meeting.

 

See Also:

 
Ranking
Was this information helpful?
Yes
No
Somewhat

Tell us why and what can we do to improve this information