10/15/18 20:33 PM  

RingCentral Rooms Connector Dial Strings

« Go Back

Article

 
SummaryHow do I create a RingCentral Room Connector Dial String?
Details
In order to avoid the Room Connector splash screen and join directly in to your meeting, you can enter the meeting details in to the dial string on your H.323/SIP device.

H.323 Dial String Format

For the full H.323 dial string format, enter the following:

[IP Address]##[Meeting ID]#[Password]#[Layout]#[Host Key]

To enter a meeting in Gallery View (Default)

For Meetings without a password, enter the following:
[IP Address]##[Meeting ID]
Example: 199.xxx.yyy.zzz##123456789
 
For Meetings with a password, enter the following:
[IP Address]##[Meeting ID]#[Password]
Example: 199.xxx.yyy.zzz##123456789#12345


To enter a meeting in Active Speaker View

For Meetings without a password, enter the following:
[IP Address]##[Meeting ID]##11
Example:
199.xxx.yyy.zzz ##123456789##11
 
For Meetings with a password, enter the following:
[IP Address]##[Meeting ID]#[Password]#11
Example: 199.xxx.yyy.zzz ##123456789#12345#11

To enter a meeting with Host Key Inputted

For Meetings without a password, enter the following:
[IP Address]##[Meeting ID]###[Host Key]
Example: 199.xxx.yyy.zzz ##123456789###123456
 

For Meetings with a password, enter the following:
[IP Address]##[Meeting ID]#[Password]#[Layout]#[Host Key]
Example: 199.xxx.yyy.zzz ##123456789#12345#11#123456

For some devices, you may try [IP Address]##[Meeting ID]*[Password]*[Layout]

NOTE: Your individual Host Key can be found in the Settings of your RingCentral Meetings.


SIP Dial String Format

For the full SIP dial string format, enter either of following:
[Meeting ID].[Password].[Layout]@[IP Address] or 
[Meeting ID].[Password].[Layout]@[FQDN]
 


To enter a meeting in Gallery View (Default)

For Meetings without a password, enter the following:
[Meeting ID]@[IP Address]
Example:
123456789@199.xxx.yyy.zzz
     
For Meetings with a password, enter the following:
[Meeting ID].[Password]@[IP Address]
Example:
123456789.12345@199.xxx.yyy.zzz
 


To enter a meeting in Active Speaker View

For Meetings without a password, enter the following:
[Meeting ID]..11@[IP Address]
Example
: 123456789..11@199.xxx.yyy.zzz
     
For Meetings with a password, enter the following:
[Meeting ID].[Password].11@[IP Address]
Example:
123456789.12345.11@199.xxx.yyy.zzz
 
NOTE:  For some Cisco and Tandberg devices, enter the following
[MeetingID]@[IP Address]
Example:
 2139746932@199.xxx.yyy.zzz 
 
Ranking
Was this information helpful?
Yes
No
Somewhat

Tell us why and what can we do to improve this information