06/30/18 00:47 AM  

Fax - Analog Telephone Adapter | Create an Extension for your Fax Machine

« Go Back

Article

 
SummaryCreating an extension for your Fax Machine to proceed with the ATA setup. This article describes the first step you need to complete when setting up your Analog Telephone Adapter (ATA) for Sending and Receiving Faxes.
Details
 

 

Fax - ATA | Create an Extension for your Fax Machine

 

For this setup, we need to create an extension with no number and device for your Fax Machine and make sure that all RingCentral call handling settings are disabled to ensure that the faxes are directly transmitted to the fax machine via the Analog Telephone Adapter (ATA). If you have an existing "Ext. with no device assigned that does not have a Number" proceed to Step 6.

 

NOTE: This is the first step in setting up your ATA device for Sending and Receiving Faxes. for more information, go to Fax - Analog Telephone Adapter | Set up ATA | Send and Receive Faxes | RingCentral.
 

2. On the Admin Portal view, click the Users tab.

User-added image

3. Select the Unassigned Extensions tab then click Add User.

User-added image
 
4. Create an Unassigned Extension with no number and no device. Select Domestic as the location.

 User-added image
 
5. Select Add Users without Phones. Do not make any selection on the State and Area Code. If you have multisite enabled, set the Site to Company then click Add. Otherwise, click Add immediately.

Proceed with the steps on the screen and confirm the transaction.

User-added image

6. On the list of Unassigned Extensions,  Select the Ext. with no device assigned that does not have a Number.   

User-added image
7. Fill out the Information for your Fax Machine's extension, and then click Save & Enable
For this example, we named the extension "Fax Machine (ATA)".

User-added image

8. You will get a confirmation window after saving the extension details. Click OK.
The Fax Machine's Extension is moved to the list of Users with Extension

User-added image

9. Select the Users With Extensions tab, and then click on the Fax Machine's extension. 

User-added image

10. Click on Screening, Greeting & Hold Music. Set the following Settings and Save:

Connecting Message: Uncheck - OFF
Hold Music: Uncheck - OFF
User greeting: Uncheck - OFF
Audio While Connecting: Check - ON

User-added image

Under Audio While Connecting, click Edit and select Ringtones. When a caller dials the Fax Number assigned to this extension, this setting will ensure that the caller will hear ringing tones before your Fax Machine picks up and give the fax tone.

User-added image
Ranking
Was this information helpful?
Yes
No
Somewhat

Tell us why and what can we do to improve this information